SMT2 (Surge AND Sway)

Email to a Friend

The SMT2 is a 2 degree of freedom SimCraft motion subsystem with surge and sway capability. You build the chassis to complete the system.

Included is two actuators, electronics box with controllers, power and USB communications pre-wired and configured.  Also included are 8 linear bearings each with 16″ hardened steel bearing rails, and four chassis mounts for the actuators.  The actuators are modified and fit with an inline mount and rod ends.  SimCraft’s industry leading integration software, including the feature packed SimCraft Control Panel is included, with access to all future PC and Console (Playstation/XBox) based integrations.

Lifetime support is also included, including phone support and remote sessions.

A 3 year actuator replacement warranty is included.

Access to digital chassis plans is included.

LEAD TIMES ARE 2-4 WEEKS AFTER PURCHASE.

Clear

$3,800.00$4,600.00

Description

Suitable for Racing and Flight Simulation

Two Dyadic SCN6 actuators and controllers are included with this system.  This is a 2DOF system which can be upgraded in the future with additional degrees of freedom.

Surge and Sway

Stroke length options:

Shorter Length………….4″ | 100mm

  • Surge 4″ | 100mm
  • Sway 4″ | 100mm

Standard Length………….8″ | 200mm

  • Surge 8″ | 200mm
  • Sway 8″ | 200mm

Extended Length………….12″ | 300mm

  • Surge 12″ | 300mm
  • Sway 12″ | 300mm

Max Force………………90lb | 40kg
Max Rotational Speed……….120 deg/s
Max Linear Speed……………..8″/s | 200mm/s
Max Acceleration……..167 deg/s/s
Max Payload……………500lb | 225kg


Axis Alignment: Mutually Perpendicular
Synchronization: Simultaneous and Independent Axis Control
Position Resolution: .002 deg  (Accuracy)
Repeatability: .02 deg | 0.00035 rad
Interpretive Interval: < 1ms  (Latency)

The following digital chassis plans are included with this product:

[chained_products price=”no”]

Additional information

Weight 56 lbs
Actuator Stroke Length

, ,

Table content goes here