SMT1 Advanced – High Force 1 Degree of Freedom (Roll OR Pitch)

Email to a Friend

The SMT1 Advanced is a 1 degree of freedom SimCraft motion subsystem with either ROLL or PITCH capability. You build or assemble the chassis to complete the system. 

Included is 1 advanced actuator, electronics box with controller, power and USB communications pre-wired and configured.  Also included are 2 frictionless rotary bearings, and two chassis mounts for the actuator.  The actuator fit with an inline mount and rod ends.  SimCraft’s industry leading integration software, including the feature packed SimCraft Control Panel is included, with access to all future PC and Console (Playstation/XBox) based integrations.

Lifetime support is also included, including phone support and remote sessions.

A 3 year actuator replacement warranty is included.

Access to digital chassis plans is included.





Suitable for Racing and Flight Simulation

An advanced, closed loop, SimCraft built, actuator and controller is included with this system.  This is a 1DOF System which can be upgraded in the future with additional degrees of freedom.

Choose Roll or Pitch.

Stroke length options:

Standard Length………….8″ | 200mm

  • Roll 40 degrees       (+/- 20)
  • Pitch 20 degrees       (+/- 10)

Extended Length………….12″ | 300mm

  • Roll 60 degrees       (+/- 30)
  • Pitch 30 degrees       (+/- 15) 

Max Force………………350lb | 160kg
Max Rotational Speed……….240 deg/s
Max Linear Speed……………..16″/s | 400mm/s
Max Payload……………1000lb | 450kg

Axis Alignment: Mutually Perpendicular
Synchronization: Simultaneous and Independent Axis Control
Position Resolution: .0005 deg  (Accuracy)
Repeatability: .001 deg | 0.000017 rad
Interpretive Interval: < 1ms  (Latency)

Additional information

Weight 40 lbs
Motion Option 1


Actuator Stroke Length


Table content goes here